Use your actual inputs
Material densities and operating factors are editable planning assumptions. Replace them with supplier data or measurements for the configuration you intend to use.
Search systemsGet a quotation ↗Nest multiple 2D DXF files with quantities. Preview sheet layouts, material utilisation and weight balance, then export DXF, SVG or CSV for planning.
DXF files stay in your browser. One file represents one part; all files in a run share the same material and thickness. Add quantities and generate a bounded outline-based planning layout.
No parts added. Upload ASCII 2D DXF files or load the sample.
Ready. Maximum 20 files, 500 requested pieces; large searches have a time limit.
Non-part balance includes skeleton, holes, spacing and potential offcuts; it is not all reusable remnant. Actual-weight allocation, when entered, is proportional to net part area.
Net part area is the closed-outline area less holes. Part mass = net area × thickness × density. Layout placement uses a bounded bottom-left outline heuristic, not an optimal-layout guarantee.
Material densities and operating factors are editable planning assumptions. Replace them with supplier data or measurements for the configuration you intend to use.
Inputs, units and results are shown together. Save a CSV or print the calculation to share your planning assumptions.
Need help with an RST product or a custom configuration? Discuss your requirement ↗
ASCII, flat XY DXF outlines using LINE, ARC, CIRCLE, LWPOLYLINE and 2D POLYLINE. Closed contours are required. Explode blocks and convert splines/ellipses to supported polylines in CAD first. Curve flattening uses a 0.2 mm target tolerance. A disconnected drawing in one file is treated as one part. Part-in-hole nesting and common-line cutting are not performed.
No. The non-part balance includes the sheet skeleton, holes, spacing and potential offcuts. It is not a certified reusable-remnant quantity. A DXF layout export contains approximated polylines; verify geometry and toolpaths in your CAM software before cutting.
Plan sheet usage before placing a cutting order. This free browser-based DXF nesting tool accepts multiple supported flat 2D DXF parts, quantities, sheet dimensions and spacing. It shows a proposed layout and material balance without requiring a cutting job or account.
Area example: a 1,000 mm × 500 mm sheet has 0.5 m² of area. Ten 100 mm × 100 mm solid square parts have 0.1 m² of net area, or 20% of that sheet area. The actual layout depends on spacing, rotation, contours and the nesting result.
एक से अधिक DXF files और उनकी quantity देकर sheet layout तथा material usage का अनुमान देखें। Cutting से पहले layout को CAD/CAM में verify करें।
Yes. Add supported DXF parts and set a quantity for each. The tool produces a proposed sheet arrangement and report.
No. The layout uses a bounded heuristic. It is a planning aid, not a globally optimal packing solver or a CAM toolpath generator. Verify cuts, lead-ins and kerf in your manufacturing software.
Flat ASCII DXF with LINE, ARC, CIRCLE, LWPOLYLINE and 2D POLYLINE. Closed contours are required. Convert unsupported splines, ellipses and blocks in CAD before import. Native DWG and SolidWorks files are not imported.
Specialised lighting, electronics and engineering—supporting the spirit of Atmanirbhar Bharat.